Maximizing Airotor Performance Through Proper Cleaning and Care : Complete Step-by-Step Guide
article
by BRIXO Dental
Proper cleaning and maintenance of your airotor handpiece are
vital for ensuring long-term performance, patient safety, and operational
efficiency. Here's a step-by-step guide to help you keep your handpiece in top
condition:
Step 1: Initial Rotation Post-Use
Immediately after a procedure, run the handpiece for about 30
seconds — with or without a bur inserted. This helps dislodge and expel any
internal contaminants, such as blood, saliva, or debris, that may have been
drawn in during use.
Step 2: Surface Cleaning
Wipe down the outer surface of the handpiece using a soft
brush or designated cleaning cloth. Avoid abrasive materials that could damage
the finish. Ensure all visible debris and biological matter are removed before
proceeding.
Step 3: Cleaning and Lubricating Internal
Components
Use only cleaning and lubrication products recommended for
dental handpieces. Carefully clean both the air intake and the bur holes, then
apply the lubricant to ensure smooth operation. This reduces friction, prevents
wear, and supports consistent performance.
Step 4: Remove Excess Lubricant
With an air/water syringe, blow air through the bur and air
holes to clear out any excess oil or residue. Inspect the expelled lubricant —
if it appears cloudy or discolored, repeat the process until it runs clear.
This ensures internal components remain clean and residue-free.
Step 5: Drying and Sterilization
Thoroughly dry the handpiece to prevent moisture retention,
which can cause damage during sterilization. Follow your manufacturer’s
specific sterilization guidelines, typically involving autoclaving, to ensure
complete disinfection before the next use.
Conclusion
Consistent and proper maintenance of your airotor handpiece is
essential to its longevity and performance. Following these steps not only
protects your investment but also upholds high standards of hygiene and care in
your practice.
No comments:
Post a Comment